Aqua One Glass Water Heater

Aqua One Glass Water Heater Installation

1. Select the proper wattage heater for your aquarium. Normally 1 watt will heat 1 litre of water. i.e. a 200W heater is required for a 180 to 200L aquarium.
2. Position the heater in the aquarium. The best position is near a strong water flow. The outlet of a power filter is ideal.
3. The heater should not come in contact with the gravel or substrate. This may cause a hot spot on the glass and cause the heater to crack.
4. Use the suction caps provided to fasten the heater to the aquarium. Suction caps should be positioned on the top third of the heater not on the heating element.
5. Do not plug the heater in unless submersed in water. Always allow 10-15 minutes for the heater to acclimate to the aquarium temperature before plugging the unit in.
6. Plug the power cord into the power socket and arrange a “drip loop” and turn on.
7. To set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window
8. on the front of the heater. A light will come on when the heater is working, It will switch off when it reaches the set temperature.
9. Confirm your set temperature with an accurate thermometer.